纳米气泡改性矿物颗粒的湖泊沉积物-水界面增氧效果实验研究     

余萍萍  王敬富  陈敬安  张耀  陈权  卢耀庭 《湖泊科学》2019,31(1):65-71

季节性缺氧导致夏季沉积物内源磷强烈释放，加剧水体富营养化，是我国西南地区深水湖泊（水库）面临的重要挑战.有效增加夏季缺氧期深水沉积物-水界面的含氧量，是减少内源磷释放的关键.现有的深水增氧技术由于缺乏对沉积物-水界面增氧的针对性，因此治理效果有限.近年来，纳米气泡已被证实具有的稳定性好、氧传质速率高和环境风险低等优点，为新型深水增氧技术研发提供了巨大潜力.本文以天然矿物材料白云母、绢云母、硅藻土和沸石为基底，负载纳米气泡，研发纳米气泡改性矿物颗粒技术，开展湖泊沉积物-水界面增氧模拟实验研究，运用平面光电极技术评估其界面增氧效果.结果表明，纳米气泡改性矿物颗粒对沉积物-水界面具有比较明显的增氧效果.其中，改性白云母、绢云母和沸石的界面持续增氧时间可达7天以上，增氧后的界面最大溶解氧（DO）浓度达4.40 mg/L，而改性硅藻土不具有增氧能力.其次，矿物粒度对改性颗粒的增氧效果有一定影响：粒度越细，界面的最大增氧浓度越高，且持续增氧时间越长.纳米气泡改性矿物颗粒技术有望成为夏季缺氧期深水沉积物-水界面精准增氧和内源污染控制的有效技术手段.  相似文献   

Strong variation in weathering of layered rock maintains hillslope‐scale strength under high precipitation          下载免费PDF全文

Jennifer Von Voigtlander  Marin K. Clark  Dimitrios Zekkos  William W. Greenwood  Suzanne P. Anderson  Robert S. Anderson  Jonathan W. Godt 《地球表面变化过程与地形》2018,43(6):1183-1194

The evolution of volcanic landscapes and their landslide potential are both dependent upon the weathering of layered volcanic rock sequences. We characterize critical zone structure using shallow seismic V_p and V_s profiles and vertical exposures of rock across a basaltic climosequence on Kohala peninsula, Hawai’i, and exploit the dramatic gradient in mean annual precipitation (MAP) across the peninsula as a proxy for weathering intensity. Seismic velocity increases rapidly with depth and the velocity–depth gradient is uniform across three sites with 500–600 mm/yr MAP, where the transition to unaltered bedrock occurs at a depth of 4 to 10 m. In contrast, velocity increases with depth less rapidly at wetter sites, but this gradient remains constant across increasing MAP from 1000 to 3000 mm/yr and the transition to unaltered bedrock is near the maximum depth of investigation (15–25 m). In detail, the profiles of seismic velocity and of weathering at wet sites are nowhere monotonic functions of depth. The uniform average velocity gradient and the greater depths of low velocities may be explained by the averaging of velocities over intercalated highly weathered sites with less weathered layers at sites where MAP > 1000 mm/yr. Hence, the main effect of climate is not the progressive deepening of a near‐surface altered layer, but rather the rapid weathering of high permeability zones within rock subjected to precipitation greater than ~1000 mm/yr. Although weathering suggests mechanical weakening, the nearly horizontal orientation of alternating weathered and unweathered horizons with respect to topography also plays a role in the slope stability of these heterogeneous rock masses. We speculate that where steep, rapidly evolving hillslopes exist, the sub‐horizontal orientation of weak/strong horizons allows such sites to remain nearly as strong as their less weathered counterparts at drier sites, as is exemplified by the 50°–60° slopes maintained in the amphitheater canyons on the northwest flank of the island. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Removal of water‐surface reflection effects with a temporal minimum filter for UAV‐based shallow‐water photogrammetry          下载免费PDF全文

I GD Yudha Partama  Ariyo Kanno  Motoyasu Ueda  Yoshihisa Akamatsu  Ryutei Inui  Masahiko Sekine  Koichi Yamamoto  Tsuyoshi Imai  Takaya Higuchi 《地球表面变化过程与地形》2018,43(12):2673-2682

The recent development of structure‐from‐motion (SfM) and multi‐view stereo (MVS) photogrammetry techniques has enabled semi‐automatic high‐resolution bathymetry using aerial images taken by consumer‐grade digital cameras mounted on unmanned aerial vehicles (UAVs). However, the applicability of these techniques is sometimes limited by sun and sky reflections at the water surface, which render the point‐cloud density and accuracy insufficient. In this research, we present a new imaging technique to suppress the effect of these water‐surface reflections. In this technique, we order a drone to take a short video instead of a still picture at each waypoint. We then apply a temporal minimum filter to the video. This filter extracts the smallest RGB values in all the video frames for each pixel, and composes an image with greatly reduced reflection effects. To assess the performance of this technique, we applied it at three small shallow‐water sites. Specifically, we evaluated the effect of the technique on the point cloud density and the accuracy and precision of the photogrammetry. The results showed that the proposed technique achieved a far denser point cloud than the case in which a randomly chosen frame was used for each waypoint, and also showed better overall accuracy and precision in estimating water‐bottom elevation. The effectiveness of this new technique should depend on the surface wave state and sky radiance distribution, and this dependence, as well as the applicability to large areas, should be investigated in future research. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

关中盆地浅层地热能赋存规律及资源量估算     

周阳  洪增林  张卉  曹晓凡  穆根胥 《中国地质调查》2020,7(2):21-29

通过野外地质调查及室内综合研究,分析了关中盆地浅层地热能的开发利用情况、赋存特征和形成模式,并对资源量进行了估算,总结了盆地不同地貌单元、不同岩性的岩土体热物性参数特征,计算了区域恒温带深度和浅层大地热流值。关中盆地地热能的形成模式主要为热传导型和热对流型: 热传导型地热资源主要分布于西安凹陷、固市凹陷等完整地质块体内; 热对流型地热资源主要分布于深大断裂直接沟通地表的区域以及断裂带周边区域。采用层次分析法对关中盆地浅层地热能进行适宜性分区,认为关中盆地整体属于地埋管地源热泵系统适宜区或较适宜区,地下水地源热泵系统适宜区和较适宜区主要分布在盆地中部漫滩区和阶地区。利用热储法,计算关中盆地浅层地热能热容量为1.38×10¹⁶ kJ/℃,浅层地热能储量巨大,开发利用前景优良。  相似文献   

移动测量技术在城市绿化普查中的应用     

庞岩  孙国强  解全波 《北京测绘》2020,(4):518-522

在新时代的城市建设中,绿化建设对于美化城市面貌和提高市民居住舒适度显得十分重要,那么城市绿化普查工作则成为绿化建设工作中的重要一环。为了改进传统绿化普查工作,本文提供一整套基于移动测量技术的城市绿化普查方案,搭配自主研发的GIS采集软件和实景三维管理平台,采集绿化信息的效率和精度显著提高,更可以优化城市绿化管理方法。  相似文献   

Research Progress of Geophysical Exploration in Karatungk Mine in Northern Xinjiang, China     

DU Peixiao  LI Yang  WEI Mengyi  HAN Chunming  ZHAO Liang  WU Jing 《中国地震研究》2020,34(3):311-327

Karatungk Mine in northern Xinjiang, China, which is a large-scale magmatic Cu-Ni sulfide mine in the Central Asian orogenic belt, has a long history of mining. The mine is located at the merging belt between Altay orogenic belt and Junggar Basin, and has strong tectonic activities. In recent years, mining source detection has become an important target for mineral exploration due to the difficulties in ore body exploitation. In this paper,we systematically summarize the achievements of the geophysical explorations in Karatungk Mine from various aspects, including tectonic backgrounds of the mine, dynamic mechanisms, geophysical characteristics and scientific challenges in the future. Because of the restrictions of observation density and analysis methods, the fine geometrical structure of the mine cannot be completely characterized yet. Therefore,in order to obtain the high-resolution structure and detailed spatial distribution of orebodies, researchers should focus on combining multiple geophysical methods, developing high-resolution imaging methods, and improving petro physical experiments in the future.  相似文献   

无人机航测技术在广东省和平县第三次全国国土调查中的应用     

张建辉 《北京测绘》2020,(4):511-513

第三次全国国土调查是查实查清我国国土资源利用现状的重要手段,对提高国土资源利用效率和建设信息化社会有着积极的推动作用。本文以广东省和平县第三次国土调查项目为基础,将无人机航测技术应用于本次三调中,快速的获取了调查区高分辨率的航拍影像数据,结合GNSS技术等进行外业核查和补绘,生产出了符合三调精度要求的DOM、DEM产品,对编制各类工作底图奠定了基础。实践证明,将无人机航测技术应用第三次全国国土调查中具有明显的优势,主要体现在精度高、效率快、成本低、利用率高等方面。  相似文献   

基于无人机遥感和面向对象法的简单地物分类研究     

袁慧洁 《测绘与空间地理信息》2020,(3):113-117,123

近年来,全国各地进行了大范围的土地利用调查,随着无人机遥感技术越来越成熟,无人机影像分析技术已深入应用到土地利用调查中,其中最多的用途是地物分类。本文选择昭通市昭阳区某乡镇区域为研究区,对采集到的无人机影像进行预处理,生成对应的正射影像;基于多种可见光植被指数,计算每3种指数合并得到影像的OIF指数,确定最佳波段组合;采用基于规则和基于样本两种面向对象分类方法,提取房屋、道路、植被等简单地物及背景。分析结果:两种方法的提取精度均达到90%以上,基于规则的面向对象分类方法精度较高,但耗时较长;基于样本的面向对象方法耗时较短,精度相对较低。两种方法相结合的全自动分类提取是下一步研究的目标。  相似文献   

三维激光扫描技术在宁化天鹅洞改造测量中的应用     

王汉顺 《测绘与空间地理信息》2020,(3):169-172

三维激光扫描技术是目前最先进的测绘数据获取方式之一,它采用非接触主动测量方式直接获取高精度的三维数据,能够对任意物体进行扫描,快速将现实世界的信息转换成计算机可处理的三维数据信息,与传统测绘技术相比,除了速度快、精度高的优势外,更有获取对象信息更全面、提供的测绘成果更丰富更直观的突出技术特点。本文以宁化天鹅洞改造测量项目为例,探讨了三维激光扫描技术在地下溶洞改造测量工作中的应用原理、工作流程、成果类型及其技术优势,希望对同类工程项目应用有一定借鉴作用。  相似文献   

我国深海钻探重入钻孔技术优选及设计思路          下载免费PDF全文

熊亮  谢文卫  卢秋平  朱芝同  刘晓林 《探矿工程》2020,47(7):1-7

深海钻探通常采用无隔水管开路钻进，当更换钻头或钻具，测井、处理孔内事故等情况时，需要起下钻后重新进入原钻孔，此过程称为重入钻孔。由于钻探船与海底孔口有数千米的水体相隔，受海浪和洋流作用，钻探船动荡不稳，钻杆柱摇摆不定，要想重新进入原钻孔并非易事。本文通过广泛调研，对海底基盘、声呐重入系统、水下电视重入系统及无人遥控潜水器（ROV）等目前几种常见的重入钻孔技术进行了详细介绍，对各种技术的优缺点进行了综合对比，优选了水下电视重入系统作为我国深海钻探重入钻孔技术方案，初步提出了技术设计思路，为样机研发和工艺制定奠定了基础。  相似文献